How Do I Enable Remote Access To MySQL Database Server?
By default remote access to MySQL database server is disabled for security reasons. However, some time you need to provide remote access to database server from home or a web server. If you want to remotely access to the database server from the web server or home, follow this quick tutorial.
MySQL Remote Access
You need type the following commands which will allow remote connections.
Step # 1: Login Using SSH (if server is outside your data center)
First, login over ssh to remote MySQL database server:
Step # 2: Edit my.cnf File
Once connected you need to edit the MySQL server configuration file my.cnf using a text editor such as vi.
- If you are using Debian Linux file is located at /etc/mysql/my.cnf location
- If you are using Red Hat Linux/Fedora/Centos Linux file is located at /etc/my.cnf location
- If you are using FreeBSD you need to create a file /var/db/mysql/my.cnf
Edit /etc/my.cnf, run:
# vi /etc/my.cnf
Step # 3: Once file opened, locate line that read as follows
Make sure line skip-networking is commented (or remove line) and add following line
For example, if your MySQL server IP is 22.214.171.124 then entire block should be look like as follows:
[mysqld] user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/English bind-address = 126.96.36.199 # skip-networking .... .. ....
- bind-address : IP address to bind to.
- skip-networking : Don’t listen for TCP/IP connections at all. All interaction with mysqld must be made via Unix sockets. This option is highly recommended for systems where only local requests are allowed. Since you need to allow remote connection this line should be removed from my.cnf or put it in comment state.
Step# 4 Save and Close the file
Restart the mysql server, enter:
# /etc/init.d/mysql restart
Step # 5 Grant access to remote IP address
Connect to mysql server:
$ mysql -u root -p mysql
Grant access to a new database
If you want to add a new database called foo for user bar and remote IP 188.8.131.52 then you need to type the following commands at mysql> prompt:
mysql> CREATE DATABASE foo;
mysql> GRANT ALL ON foo.* TO [email protected]'184.108.40.206' IDENTIFIED BY 'PASSWORD';
How Do I Grant Access To An Existing Database?
Let us assume that you are always making connection from remote IP called 220.127.116.11 for database called webdb for user webadmin, To grant access to this IP address type the following command At mysql> prompt for existing database, enter:
mysql> update db set Host='18.104.22.168' where Db='webdb';
mysql> update user set Host='22.214.171.124' where user='webadmin';
Step # 5: Logout of MySQL
Type exit command to logout mysql:
Step # 6: Open port 3306
You need to open TCP port 3306 using iptables or BSD pf firewall.
A sample iptables rule to open Linux iptables firewall
/sbin/iptables -A INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPT
OR only allow remote connection from your web server located at 10.5.1.3:
/sbin/iptables -A INPUT -i eth0 -s 10.5.1.3 -p tcp --destination-port 3306 -j ACCEPT
OR only allow remote connection from your lan subnet 192.168.1.0/24:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
Finally save all rules:
# service iptables save
A sample FreeBSD / OpenBSD pf rule ( /etc/pf.conf)
pass in on $ext_if proto tcp from any to any port 3306
OR allow only access from your web server located at 10.5.1.3:
pass in on $ext_if proto tcp from 10.5.1.3 to any port 3306 flags S/SA synproxy state
Bonus: Enable mysql remote for user root:
mysql> update user set host='%' where user='root';
Nguyen Sĩ Nhàn